BioGrip Medium

Pittura Minerale Interni / Esterni

TDS
PDF files for Download

BioGrip Medium, è uno speciale fondo pigmentato per interno e esterno ad effetto rustico civile, per rivestimenti coprenti su qualsiasi tipo di supporto sia minerale, sintetico o silossanico. Può essere applicato su intonaci nuovi, intonaci vecchi o pareti precedentemente pitturate purchè portanti e non sfarinanti. Eccellente ponte di adesione per supporti lisci e portanti come cartongesso, calcestruzzo, gesso e intonaci tradizionali. Biogrip Medium ha una granulometria tale da poter essere utilizzato come fondo con elevato potere riempitivo e per ottenere finiture rustiche.

 

Brochure del prodotto  

 

 

Caratteristiche:

  • Finitura uniforme.
  • Superior durability & adhesion
  • Ideale per finiture residenziali e decorative.
  • Nessun Voc o solvente, antiasma e ipoallergenico
  • Inodore,naturalmente resistente alla muffa grazie all’elevata alcalinità
  • Soddisfa gli standard più elevati in materia di salute con certificazione Cradle to Cradle argento, rating A+ per le emissioni di Voc secondo il metodo Francese, Passed CA1350 per le basse emissioni
  • Riducono il “carbon footprint” della industria chimica grazie alle formulazioni concentrate.

 

 

Ora che hai scelto Biogrip Medium ecco cosa ti serve per iniziare

Gli Attrezzi

BioGrip Medium può essere applicato a pennello,rullo o spruzzo, come le pitture tradizionali. Puoi preparare la stanza con nastratura, mascheratura, copertura della superficie,prendere eventuali scale.
Prendere un contenitore pulito per diluire la quantità di prodotto necessaria.

Tool-list

Diluire con acqua

Le pitture minerali della Linea Domus hanno bisogno di aggiunta di acqua prima di essere usate. Perché?

  • Permette di avere un prodotto pulito e pennellabile senza aggiunta di additivi tossici e
  •  riduce del 40% il carbon footprint.

Diluire e miscelare il prodotto in un contenitore pulito è un’operazione semplice; aggiungere l’acqua secondo le quantità di seguito consigliate; utilizzare un trapano o una spatola e mescolare accuratamente. Maneggiare da 2 a 4 minuti fino a quando il prodotto ha una consistenza uniforme, senza residui di acqua. La diluizione varia in base al tipo di prodotto (bianco o neutro) o del colore scelto. Il tipo di base utilizzato (bianco o neutro) è indicato nell’etichetta apposta sul barattolo.

BioGrip Medium diluizione 1 Litro 2.5 Litri 5 Litri
Base Bianca 10% 100 ml 250 ml 1.25 lt

PREPARARE LA SUPERFICIE

Preparare accuratamente la superficie e utilizzare il tipo di primer raccomandato. Maggiori dettagli sono presenti nella tabella sopra, nella scheda tecnica o nell’etichetta apposta sul barattolo.

PITTURA I TUOI MURI

Inizia a pitturare assicurandoti di lasciare abbastanza tempo di asciugatura tra le due mani: approssimativamente dalle 2 alle 4 ore. Generalmente si consiglia di applicare due mani di prodotto.

Testing & Certification

Cradle To Cradle Certified™

ROMABIO in questo momento è l’unico produttore al mondo che è riuscito a certificare ben 13 prodotti, ottenendo il certificato «Cradle to Cradle® Argento versione 3.1». Questa certificazione è estremamente rigorosa, trasparente e le valutazioni sono gestite da un ente terzo, per fornire il massimo della trasparenza. ROMABIO ha scelto la certificazione «Cradle to Cradle®» fra i tanti enti certificanti, perchè i suoi standard sono estremamente rigorosi in fatto di sostenibilità ambientale e impatto sulla salute Umanala certificazione Cradle to Cradle è multi-attributo e si basa su 5 punti fondamentali per la Salute Umana e per L’Ambiente.Il sistema di certificazione Cradle to Cradle è gestito dalla Cradle to Cradle Product Innovation Insitute SM creato come quadro generale da William McDonough e dal proclama del Dr.Michael Braungart :” Dalla Culla alla Culla: rifaer il nostro modo di fare le cose”.
L’approccio di Romabio è veramente Cradle to Cradle: proveniente dalla natura, a differenza degli altri prodotti vernicianti tradizionale, ma con l’innovazione in termini di prestazioni e design.

Interior and Exterior Paints 

cradle to cradle certified

Dichiarazione di prodotto sano HPD

HPD è un riconoscimento basato su una dichiarazione relativa al contenuto e il rischio nell’uso del prodotto, sulla base dei componenti utilizzati come materia prima.HPD con le pitture ROMABIO può contribuire alla acquisizione dei punti per i crediti LEED v4 su Materiali e risorse. costruire un’informativa del prodotto e la sua ottimizzazione attraverso il principio fondamentale: HPD deve contenere una “Completa Dichiarazione di tutti i pericoli noti in base a ciascun ingrediente utilizzato (direttamente e indirettamente) con una concentrazione di 1000 ppm.

Interior Paints

Exterior Paints

Risultati dei Test per la Qualità dell’Aria Interna

Romabio ha superato i più severi e stringenti standard dei test per dimostrare che i prodotti non impoveriscono la Qualità dell’Aria Interna:

  1. CDPH SM V1.1-2010 (CA01350) Emissions Test (per Section 8.5)
  2. ASTM D5116 Emissions Test Report with CDPH SM V1.1-2010
  3. French VOC Label Small Chamber Emissions Test and met the French VOC Label “A+” Class criteria.

IAQ Test Results

eurofins-logo call-recycle-logo cradle to cradle certified

Rapporto di verifica della Tossicità

ROMABIO si è avvalsa dell’Istituto ToxServices , una agenzia di verifica che ha più di un decennio di esperienza nel campo della tossicologia,valutazione del rischio, valutazione del rischio comparativa, e l’applicazione della scienza per promuovere la salute umana e la sostenibilità ambientale ,per verificare e affermare che:

  1. ROMABIO pitture minerali per interni ed esterni non contengono i seguenti additivi:
    1. APEO (Alkylphenol Ethoxylates)
    2. HCHO (Formaldehyde)
    3. PEG (Polyethylene Glycol)
    4. PG (Propylene Glycol)
  2.  ROMABIO pitture minerali per interni ed esterni non contengono sostanze chimiche associate alla Sick Building Syndrome ( SBS ) o Sindrome da Edificio Malato
  3.  I prodotti vernicianti ROMABIO non contengono VOC.
  4. I prodotti ROMABIO non contengono sostanze chimiche elencate nella Lista Rossa ( Living Building Challenge ).

Toxicity Report

tox-services-logo

Criteria Int. Standard Value Unit
VOC (escluso paste coloranti 2004/42/CE Max. Value, 40g/l (2010), Exterior Wall, Paint for Masonry, DIN EN ISO 11890-1/2 0.00 g/l
Coefficiente assorbimento vapore acqueo EN 1062-3 – DIN 52617 > 0.62 kg/(m²• √h)
Permeabilità al vapore acqueo DIN 53122 < 150 m Sd 0.14 Buona g/m² (24h)
Punto di Bianco CIE 80 %
Ritenzione allo sporco EN 10795 Alta > 21
Temperatura minima di applicazione UNI 10793 > 5 °C
Applicazione su intonaci non perfettamente asciutti UNI EN 13300 Possibile
Pittura per Esterni/interni opaca, a base di silicati di potassio DIN 18363 Paragraph 2.4.1 Si
Qualità applicative UNI 10794 Buone
Potere coprente e mascherante ISO 6504-3 M.U. 1631 (RC 100 μm Humid) Classe 2 < 96 – < 98
Valore pH DIN 19266 12 – 13
Resistenza naturale alle muffe DIN 19266 Buona
Resistenza agli alcali UNI 10795 Eccellente
Peso Specifico (23°C) EN ISO 2811-2 1.7 g/ml
Granulometria DIN 19643 – EN 21524 0.5 – 0.6 mm
Aspetto del film UNI EN ISO 2813 < 5 Super Opaco
Reazione al fuoco EN 13501-1:2002 A 1 NON COMBUSTIBILE
Tossicità EN 13501-1:2002 Non-Tossica
Formaldeide 0%
APEO (AlkylFenol Etossilati) 0%
PEG (Glicole Polietilenico) 0%
PG (Glicole propilenico 0%
Biocidi 0%

Non contiene prodotti chimici che possono aggravare o causare asma, vedi NIH Asthma Report 2012.

 

 

1 Identification of the Substance/Mixture & 0f the Company/Undertaking

1.1 Product identifier

Code     None
Product Name     BioGrip Medium

1.2 Relevant Identified Uses of the Substance or Mixture & Uses Advised Against

Intended Use     Paint For Interior

1.3 Details of the Supplier of the Safety Data Sheet

  • Name     ROMA – Eco-Sustainable Building Technologies
  • Full Address     554 North Avenue NW, Suite B
  • District & Country Atlanta, GA 30318 | United States of America (USA)
  • 678-905-3700

1.4 Emergency Telephone Number

For Urgent Inquiries Refer To      Call 911 if you have a poison emergency.
Call the CDC if swallowed but person is alert 1-800-222-122

2 Hazards Identification

2.1 Classification of the Substance or Mixture

The product is classified as hazardous pursuant to the provisions set forth in Directives 67/548/EEC and 1999/45/EC and/or EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). The product thus requires a safety data sheet that complies with the provisions of EC Regulation 1907/2006 and subsequent amendments.

Any additional information concerning the risks for health and/or the environment are given in sections 11 and 12 of this sheet.

  • Danger Symbols     Xi
  • R Phrases     36/38

The full wording of the Risk (R) and hazard (H) phrases is given in section 16 of the sheet.

2.2 Label Elements

Hazard labeling pursuant to Directives 67/548/EEC and 1999/45/EC and subsequent amendments and supplements.

  • R36/38     Irritating to Eyes and Skin.
  • S2     Keep Out of the Reach of Children.
  • S25     Avoid Contact with Eyes.
  • S26      In Cases of Contact with Eyes, Rinse Immediately with Plenty of Water and Seek Medical Advice.
  • S37     Wear Suitable Gloves.
  • S46     If Swallowed, Seek Medical Advice Immediately and Show this Container or Label.
  • CONTAINS     CALCIUM HYDROXIDE

2.3 Other Hazards

Information not available.

3 Composition/Information on Ingredients

3.1 Substances

Information not relevant.

3.2 Mixtures

Identification Conc. % Class. 67/548/EEC Class. 1272/2008 (CLP)
SILICIC ACID, POTASSIUM SALT
CAS        1312-76-1 14 – 14.5 Xi R36/38 Skin Corr. 1B H314, Skin Irrit. 2 H315
EC          215-199-1
INDEX     –
Reg. NO. 01-2119456888-17

T+ = Very Toxic (T+), T = Toxic(T), Xn = Harmful (Xn), C = Corrosive (C), Xi = Irritant (Xi), O = Oxidizing (O), E = Explosive(E), F+ = Extremely Flammable(F+), F = Highly Flammable(F), N = Dangerous for the Environment (N)

The full wording of the Risk (R) and hazard (H) phrases is given in section 16 of the sheet.

First Aid Measures

4.1 Description of First Aid Measures

No harm to the staff authorized to use has been reported. However, in case of contact, inhalation or ingestion, the following general measures provided for a first aid shall be taken.

  • EYES & SKIN     Wash with plenty of water; if the irritation persists, seek medical advice.
  • INHALATION     Remove to open air. If respiration is difficult, administer artificial respiration and seek medical advice.
  • INGESTION     Seek medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.

4.2 Most Important Symptoms & Effects, Both Acute & Delayed

No episodes of damage to health ascribable to the product have been reported.

4.3 Indication of Any Immediate Medical Attention & Special Treatment Needed

Follow doctor’s orders.

5 Firefighting Measures

5.1 Extinguishing Media

SUITABLE EXTINGUISHING MEDIA

The extinction equipment should be of the conventional kind: Carbon Dioxide, Foam, Powder and Nebulized Water.

EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONS

None in particular.

5.2 Special Hazards Arising From the Substance or Mixture

HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products (Carbon Oxide, Toxic Pyrolysis Products, etc.).

5.3 Advice for Firefighters

GENERAL INFORMATION

Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.

SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS

Hardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cut proof and antistatic), a depressurized mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) in the event of large quantities of fume.

6 Accidental Release Measures

6.1 Personal Precautions, Protective Equipment & Emergency Procedures

Eliminate all sources of ignition (cigarettes, flames, sparks, etc.) from the leakage site. If there are no contraindications, spray solid products with water to prevent the formation of dust. Use breathing equipment if fumes or powders are released into the air. Block the leakage if there is no hazard. Do not handle damaged containers or the leaked product before donning appropriate protective gear. For information on risks for the environmental and health, respiratory tract protection, ventilation and personal protection equipment, see the other sections of this sheet. These indications apply for both processing staff and those involved in emergency procedures.

6.2 Environmental Precautions

The product must not penetrate the sewers, surface water, ground water and neighboring areas.

6.3 Methods & Material for Containment & Cleaning Up

Use inert absorbent material (sand, vermiculite, diatomaceous earth, Kieselguhr, etc.) to soak up leaked product. Collect the majority of the remaining material and deposit it in containers for disposal. If there are no contraindications, use jets of water to eliminate product residues. Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions set forth in point 13.

6.4 Reference to Other Sections

Any information on personal protection and disposal is given in sections 8 and 13.

7 Handling & Storage

7.1 Precautions for Safe Handling

Do not smoke while handling and use.

7.2 Conditions for Safe Storage, Including Any Incompatibilities

Store in a well-ventilated place; keep far away from sources of heat, bright flames and sparks and other sources of ignition.

7.3 Specific End Use(s)

Information not available.

8 Exposure Controls/Personal Protection

8.1 Control Parameters

Name Type Country TWA/8h STEL/15min
mg/m3 ppm mg/m3 ppm
TALC TLV-ACGIH 2
OEL IRL 0.8
WEL UK 1

8.2 Exposure Controls

As the use of adequate technical equipment must always take priority over personal protection equipment, make sure that the workplace is well aired through effective local aspiration or bad air vent. If such operations do not make it possible to keep the concentration of the product below the permitted workplace exposure thresholds a suitable respiratory tract protection must be used. See product label for hazard details during use. Ask your chemical substance suppliers for advice when choosing personal protection equipment. Personal protection equipment must comply with the rules in force indicated below.

HANDLING PROTECTION

Protect hands with category III (Ref. Directive 89/686/EEC and Standard EN 374) work gloves, such as those in PVA, butyl, fluoroelastomer or equivalent. The following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to preparations should be checked before use, as it can be unpredictable. Gloves` limit depends on the duration of exposure.

EYE PROTECTION

Wear hood visor or protective visor together with airtight goggles (Ref. Standard EN 166).

SKIN PROTECTION

Wear category III professional long-sleeved overalls and safety footwear (Ref. Directive 89/686/CEE and Standard EN 344). Wash body with soap and water after removing overalls.

RESPIRATORY PROTECTION

If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company’s prevention and protection service is exceeded, wear a mask with an B or universal filter, the class (1, 2 or 3) of which must be chosen according to the limit concentration of use (ref. Standard EN 141).

The use of respiratory tract protection equipment, such as masks like that indicated above, is necessary to reduce worker exposure in the absence of technical measures. The protection provided by masks is in any case limited.

If the substance in question is odorless or its olfactory threshold is higher than the relative exposure limit and in the event of an emergency, or when exposure levels are unknown or the concentration of oxygen in the workplace is less than 17% volume, wear self-contained, open-circuit compressed air breathing apparatus (ref. standard EN 137) or fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece (ref. standard EN 138).

9 Physical & Chemical Properties

9.1 Information on Basic Physical & Chemical Properties

Appearance Liquid
Color White
Odor Characteristic
Odor Threshold
pH 12 – 13
Melting or Freezing Point
Boiling Point
Distillation Range
Flash Point > 61°C
Evaporation Rate
Flammability of Solids & Gases
Lower Inflammability Limit
Upper Explosive Limit
Lower Explosive Limit
Vapor Pressure
Vapor Density
Specific Gravity 1,700 Kg/l
Solubility Water
Partition Coefficient: Octanol/Water
Ignition Temperature
Decomposition Temperature
Viscosity
Reactive Properties

9.2 Other information

VOC (Directive 2004/42/EC) 5.52 g/lt

Matt coatings for interior walls and ceilings. EU limit value for this product
(cat. A/a): 75 g/lt (2007) / 30 g/lt (2010).

10 Stability & Reactivity

10.1 Reactivity

There are no particular risks of reaction with other substances in normal conditions of use.

CALCIUM CARBONATE     Decomposes at temperatures above 800°C.

10.2 | Chemical Stability

The product is stable in normal conditions of use and storage.

10.3 Possibility of Hazardous Reactions

No hazardous reactions are foreseeable in normal conditions of use and storage.

10.4 Conditions to Avoid

None in particular, however the usual precautions used for chemical products should be respected.

10.5 Incompatible Materials

CALCIUM CARBONATE    Acids

10.6 Hazardous Decomposition Products

In the event of thermal decomposition or fire, vapors potentially dangerous to health may be released.

CALCIUM CARBONATE     Calcium Oxides, Carbon Oxides.

11 Toxicological Information

According to currently available data, this product has not yet produced health damages. Anyway, it must be handled according to good industrial practices.

11.1 | Information on Toxicological Effects

Acute Effects: stinging eyes. Symptoms may include: rubescence, edema, pain and lachrymation. Contact with skin may cause: irritation, erythema, edema, dryness and chapped skin. Vapor inhalation may slightly irritate the upper respiratory tract. Ingestion may cause health disorders, including stomach pain and sting, nausea and sickness.

12 Ecological Information

No specific data are available for this product. Handle it according to good working practices. Avoid littering. Do not contaminate soil, sewers and waterways. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation. Please take all the proper measures to reduce harmful effects on aquifers.

12.1 Toxicity

No specific data are available for this product. Handle it according to good working practices. Avoid littering. Do not contaminate soil, sewers and waterways. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation. Please take all the proper measures to reduce harmful effects on aquifers.

12.2 Persistence & Degradability

Information not available.

12.3 Bioaccumulative Potential

Information not available.

12.4 Mobility in Soil

Information not available.

12.5 Results of PBT & vPvB assessment

Information not available.

12.6 Other Adverse Effects

Information not available.

13 Disposal considerations

13.1 Waste Treatment Methods

Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.

Disposal must be performed through an authorized waste management firm, in compliance with national and local regulations.

CONTAMINATED PACKAGING

Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.

14 Transport Information

The product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.

15 Regulatory Information

15.1 Safety, Health & Environmental Regulations/Legislation Specific for the Substance or Mixture

SEVESO CATEGORY     None

RESTRICTIONS RELATING TO THE PRODUCT OR CONTAINED SUBSTANCES PURSUANT TO ANNEX XVII TO EC REGULATION 1907/2006.
3

SUBSTANCES IN CANDIDATE LIST (ART. 59 REACH)
None

SUBSTANCES SUBJECT TO AUTHORIZATION (ANNEX XIV REACH)
None

HEALTHCARE CONTROLS
Workers exposed to this chemical agent must not undergo health checks, provided that available risk-assessment data prove that the risks related to the workers’ health and safety are modest and that the 98/24/EC directive is respected.

15.2 Chemical Safety Assessment

No chemical safety assessment has been processed for the mixture and the substances it contains.

16 Other Information

Text of hazard (H) indications mentioned in section 2 – 3 of the sheet.

  • EYE IRRIT. 2     Eye Irritation, Category 2.
  • SKIN IRRIT. 2     Skin Irritation, Category 2.
  • H319     Causes Serious Eye Irritation.
  • H315     Causes Skin Irritation.

Text of hazard (R) phases mentioned in section 2 – 3 of the sheet.

  • R36/38     Irritating to Eyes and Skin.

GENERAL BIBLIOGRAPHY

  1. Directive 1999/45/EC and following amendments
  2. Directive 67/548/EEC and following amendments and adjustments
  3. Regulation (EC) 1907/2006 (REACH) of the European Parliament
  4. Regulation (EC) 1272/2008 (CLP) of the European Parliament
  5. Regulation (EC) 790/2009 (I Atp. CLP) of the European Parliament
  6. Regulation (EC) 453/2010 of the European Parliament
  7. The Merck Index. – 10th Edition
  8. Handling Chemical Safety
  9. Niosh – Registry of Toxic Effects of Chemical Substances
  10. INRS – Fiche Toxicology (toxicological sheet)
  11. Patty – Industrial Hygiene & Toxicology
  12. N.I. Sax – Dangerous properties of Industrial Materials-7, 1989 Edition

Note For Users

The information contained in the present sheet are based on our own knowledge on the date of the last version. Users must verify the suitability & thoroughness of provided information according to each specific use of the product.

This document must not be regarded as a guarantee on any specific product property.

The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the current health & safety laws & regulations. The producer is relieved from any liability arising from improper uses.

FIELDS OF APPLICATION

Excellent non-acrylic primer paint for interior and exterior surfaces, provides an anchor and consolidation coat for mineral paints and plasters when they are being applied to all Portland cement surfaces and new sheetrock. BioGrip Medium provides an anchor coat for application of mineral paints and plasters on synthetic stuccos, acrylic and solvent painted surfaces where mineral paints or plaster finishes are desired. BioGrip Medium is formulated to adhere to all surfaces, interior and exterior. BioGrip Medium, a potassium silicate paint, provides superior adhesion than typical acrylic or waterborne paints. Extreme durability in all environmental conditions and climates.

BioGrip Medium can be used as a 1st coat paint for new and old sheetrock, masonry repairs, and as a decorative finish paint for wall and ceilings. For example, when used as a 1st coat primer, only 1 coat of final finish is required applying BioDomus SuperFlat or EcoDomus Matte (as a decorative finish), i.e. the 2nd coat finish.

BioGrip Medium is a medium-fine granulated potassium silicate paint developed as a primer base for all mineral plasters. Medium granulation is viable when covered with only 1 coat of paint or very fine, thin plasters, such as venetian plasters Grassello Bio or BioMarmorino. For one (1) base coats such as BioCement GF and GM, or two (2)-coats of most plasters, BioGrip Medium granulation should be fully covered upon final coat of plaster application.

PRODUCT FEATURES

A 95% natural mineral product, completely permeable, breathable, absorbs CO2, provides good anchoring power to mineral surfaces by petrifaction (water glass); for smooth and rough surfaces. Provides protection against the formation of bacteria that forms mold. Product is considered an organic product, ideal for use in homes, schools and hospitals, and work sensitive areas.

BioGrip Medium can be tinted with natural oxide earth tints and 0% VOC colorants, offering superior adhesion when required, with minimal impact to the environment, providing toxic free air quality for indoors. BioGrip Medium is an organic paint material as described in the Bio Category description.

TYPE OF PRODUCT

Silicate coating according to DIN 18363, based on potassium silicate with 5% organic stabilizers.

SHEEN FINISH

Flat

COLOR

Custom color tint matching is available.

APPLICATION CYCLE INSTRUCTIONS

BRUSH AND ROLLER APPLICATIONS

1ST COAT     Dilute BioGrip Medium with 40% water, maximum 6 liters of water per one (1) 15 liter bucket of BioGrip Medium.

On porous surfaces apply product abundantly so as to penetrate sufficiently to consolidate and bond correctly.

On non-porous surfaces apply product evenly as needed to cover surface completely, being careful not to leave voids or unpainted surfaces. Diluted material must be stirred constantly to permit suspension of granules and not permit settling at bottom of paint buckets during application.

2nd COAT     No 2nd coat is needed unless product was improperly applied, or unless old or worn surfaces have absorbed excessive material and may require an additional application. Always allow at least 8 – 12 hours drying time before applying any 2nd coats.

SUGGESTIONS     When mixing large quantities of BioGrip Medium it is advised to pour out sufficient quantity of diluted material into the roller bucket or pail so that the brush or roller cover is not completely submerged, consuming all paint product before adding new additional painting material. Stir again the larger quantity of diluted material before re-supplying the pail or roller bucket with product. This will ensure an even supply of paint product and granules mixed properly together so that the BioGrip Medium will be consumed correctly.

PAINT SPRAYERS

1st COAT     Use correct spray tip and filter as may be required to apply granulated paint material. Failure to follow paint sprayer recommendations for granulated paint may cause serious or permanent damage to sprayer or spray tip. Airless sprayers are considered more ideal for this type of paint product. Follow dilution and application instructions as indicated for brush and roller applications. Care must be taken during spraying time that diluted paint material is stirred often so that paint solution and granules are consumed correctly during spraying.

2nd COAT     No 2nd coat is needed unless product was not sufficiently applied during spraying.

SPRAY TIP USAGE     BioGrip Medium is a heavy aggregate and can create difficulties using an airless sprayer unless the sprayer is a high compression sprayer, using no filters, applying product with a # 0.025 mm size Titanium spray tip. Consult paint sprayer manufacturer always before spraying aggregate paints.

GRAIN SIZE     0.5 – 0.6 mm

MIXING PAINT & WATER

Most of our paint formulas are concentrated and require water to be added to them for proper use. This process means we can sell more coverage in an economical package that decreases the cost for transport, reduces the carbon footprint, helping the your pocket book and the environment.

Mix paint and water with an electric drill and paint paddle, or mix well by hand! If water is sitting on the top of your mixture, the paint is not properly mixed!

TOOLS

Apply with brush, roller or with an appropriate sprayer.

DRYING TIME

Ideal drying time is at least twelve hours. With lower temperature and humidity more time may be needed.

Do not apply BioGrip Medium on the exterior if there is a risk of thunder storms or showers during the 12 hour drying time needed for product to dry and carbonize correctly.

CONSUMPTION/COVERAGE

Approximately 1,300 ft2 / 121 mt2 – 1,800 ft2 / 167 mt2 per 15 liter bucket. On rough or porous surfaces predict higher consumption. Determine exact consumption by performing a test on the surface to be treated.

PACKAGING

Plastic buckets of 1, 5 and 15 liters.

APPLICATION CYCLES ON DIFFERENT TYPES OF BASES

Make sure base is solid, dry and well cleaned, prepared with skill. It is recommended to observe the rule VOB DIN 18 363, Part C, paragraph 3

Sheetrock

Apply BioGrip Medium on painted sheetrock diluted with water at 40% as an anchor coat for mineral paints such as BioCalce Classico paints, BioDomus I and II, and all Slaked Lime Plasters. If sheetrock is new virgin material, the sheetrock must be consolidated with EcoForte Consolidator, diluted with water 300% for 1st coat, for all surfaces, and diluted with water 50% and re-applied on all sheetrock mud, and allow to dry for 8 – 12 hours. Apply diluted BioGrip Medium as the anchor coat prior to application of mineral paints or plasters. Another option for consolidation of new sheetrock is to roll or spray 1 coat of BioDomus SuperFlat diluted with water at 40% and allow to dry 8 hours before application of BioGrip Medium. BioGrip Medium can also be used as a tinted paint base for application for BioCalce Classico paints, BioDomus and EcoDomus potassium silicate paints and washes.

WOOD

BioGrip Medium though it can be applied to all types of wood surfaces, it is not suggested as the aggregate size may be undesirable as a primer coat prior to applying BioDomus and EcoDomus paints.

Autoclaved Aerated Concrete

BioGrip Medium is an excellent consolidator and primer paint for all types of Aerated Concrete Blocks which permits the application of BioDomus and EcoDomus paints, BioCement Stucco products, and Slaked Lime plasters such as BioMarmorino and Grassello Bio. BioGrip Medium will penetrate deep into the pours of Aerated Concrete Blocks to strengthen and consolidate the surface to provide dust and particle free hardened surface. BioGrip Medium will also permit applications of any type of cement stucco material to bind to the surface of Aerated Concrete Blocks. Apply BioGrip Medium diluted with water at 30%, 2 coats, before applying finish materials to the block.

Adobe Brick

BioGrip Medium is an excellent consolidator and primer paint for mud brick walls, interior and exterior, which permits the application of BioDomus and EcoDomus paints, BioCement Stucco products, and Slaked Lime plasters such as BioMarmorino and Grassello Bio. BioGrip Medium will penetrate deep into the pours of Adobe or Mud Brick walls to strengthen and consolidate the surface to provide dust and particle free hardened surface. Apply 1 coat of Potassium Silicate Concentrate diluted with water 100%, applying product in one area at a time till the Adobe Brick has completely absorbed the diluted material. Allow to dry for 12 hours before applying BioGrip Medium. Apply BioGrip Medium diluted with water at 30%, 2 coats, allowing 8 hours drying between coats, and allow final coat to dry 12 hours before applying mineral paints, stucco or platers to the block.

New Cement Stuccos

New portland cement should not be painted for about 28 days to ensure proper anchoring and drying. Apply 1 coat of BioGrip Medium with 30% water and allow to dry for at least 12 hours. Apply mineral paints or plasters as directions require. For Natural Lime stucco’s or NHL 3.5 or NHL 5.0 cements, BioMicro Grip is not required to be applied prior to application of mineral paints or plasters. These types of stucco materials can be painted or plastered immediately after stucco has properly set.

Decaying or Crumbling Stuccos or Powdery Surfaces

Chalking surfaces, which could prevent the proper anchoring of the base coating must be removed and pressure washed. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces and allow to dry for at least 12 hours. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces, applying 2 – 3 coats in rapid succession and allow to dry for at least 12 hours. Apply 1 coat of BioGrip Medium with 30% water and allow to dry for at least 12 hours. Apply mineral paints or plasters as directions require.

Coatings with Efflorescence

Cement surfaces showing efflorescence should be removed with acid and thoroughly rinsed with water. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces and allow to dry for at least 12 hours. For coatings on surfaces damaged by the saltpeter or efflorescence no guarantees can be provided. Apply 1 coat of BioGrip Medium with 40% water and allow to dry for at least 12 hours. Apply mineral paints or plasters as directions require.

Aged Cement Stuccos

When new stucco repairs are performed on older cement stuccos, apply Potassium Silicate Primer diluted 100% with water (1:1), to older surfaces prior to applying new cement stucco. Dirty and/or contaminated surfaces should be cleaned and any attached algae removed manually or by mechanical means, i.e., with a high pressure washer. Stucco damaged by algae or mold should be treated with EcoDis. Apply 1 coat of BioGrip Medium with 40% water and allow to dry for at least 12 hours. Apply mineral paints or plasters as directions require.

Stucco Repairs

See Aged Cement Stuccos above.

Mineral Paints or Lime Wash

Potassium Silicate Concentrate or EcoForte Consolidator can be applied on existing Mineral Paints or Lime Washes to consolidate worn or powdery bases prior to applying BioGrip Medium. Apply either consolidator product, diluted 100% with water (1:1), and allow to dry at least 12 hours. Apply 1 coat of BioGrip Medium with 40% water and allow to dry for at least 12 hours. Apply mineral paints or plasters as directions require.

Brick Surfaces

For consolidation of old brick mortars: Dirty and/or contaminated surfaces should be cleaned and any attached algae removed manually or by mechanical means, i.e., with a high pressure washer. Apply 1 coat of EcoDis on dried surface and allow to dry for at least 12 hours. Apply 2 Coats of Potassium Silicate Concentrate, diluted 100% with water (1:1) in rapid succession. Allow double coat to dry for at least 12 hours. Apply 1 coat of BioGrip Medium with 30% water and allow to dry for at least 12 hours. Apply BioDomus I or II, BioCalce Classico paints, or BioCement GF and GM as directions require.

.

STORAGE

Store in a cool, dry and protected from frost. Close the open containers with care. Store liquids only in plastic.

Warning!

Do not apply any products in direct exposure to strong/hot sunlight, rain, mist, high humidity (> 80%), at dew-point formation, or in the presence of strong wind. Beware of the danger of frost overnight. If applied by roller or sprayer, protect surrounding surfaces as necessary. Protect eyes and skin from splashes of paint. Cover glass, ceramic, natural stone, brick, metal, wood, painted surfaces and glazed tiles. Clean affected areas immediately with water. Prominent elements of the building (cornices, parapets, etc.,) should be treated with skill, covering flashings, gutters, copper coatings, etc. …

Do not work in air temperature lower than 13°C / 55°F and not above 31°C / 88°F. Clean work tools with water immediately after use. Keep out of reach of children. In case of contact with eyes and skin, wash immediately with plenty of water. In cases of consumption, consult a Doctor or call the CDC Poison Center (see Safety Data Sheet).

In case of contact with eyes and skin, wash immediately with plenty of water and/or a saline solution. Always keep a good supply of saline solution for eyes and use abundant amounts to wash eyes. Do not rub eye lids or physically touch your cornea or surrounding area prior to and during washing. Consult a Doctor immediately in cases of irritation or severe burning sensation. In cases of consumption, consult a Doctor or call the CDC Poison Center (see Safety Data Sheet). Keep out of reach of children.

Water Contamination Hazard

Class 1 This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of information required by the CPR, and it is classified as a non-hazardous material.

Product Contamination Hazard

CODE CER/NORMATIVE EAC/ Decision commuted by the Commission n. 2000/532/CE

Not Dangerous The directive 75/442/CEE, 08 01 production, disposal, formulation, supply, use, and removal of paints and varnishes: 10 13 04 for removal of paints and varnishes; 10 13 04 disposal of lime and hydrated lime products.

DISPOSAL

Do not enter product in its original concentration into drains or open waters. Do not store at public waste disposal sites. In case of conduction into adapted biological purification plants no disturbances need be expected. The preparation has been estimated by conventional method (calculated-procedure) of EG directive 1999/45/EG) and is classified as non-hazardous for the environment.

Dispose according to local regulations. Paint waste code 080,103 (waste paint and water-based glazes). Empty cans should be disposed of according to local regulations; plastic buckets are 100% PBS, NO. 5, approved for food storage; 100% recyclable if cleaned thoroughly prior to recycling.

ADDITIONAL INFORMATION

This Technical Sheet lists data collected on the basis of technique and experience. Given the multiplicity of use of the product they cannot be binding and the user can not refrain from using common sense and experience for the individual case. This information shall not constitute any legal obligation and no obligation from the seller or point of purchase, or any agreements inferred by employees who sale this product. Insurance or guarantees issued by our employees or employees should always be confirmed separately in writing. Any information about product adaptability and use of the product, must be verified by user prior to purchase. Check the exact consumption of product for the surface where product may be applied to determine amount of products needed. The color matching must be verified by the user before starting work.